Installation Precautions and usage for electric hospital icu bed

Installation Precautions and usage for electric hospital icu bed

1. Before using the multifunctional Annecy electric medical bed, first need to check whether the power cord is firmly connected. Whether the controller cable is reliable.

2. The wire and power cords of the linear actuator of the controller shall not be placed between the lifting link and the upper and lower bed frames ,which to prevent the wires from being cut and causing personal accidents.

3. After the back is raised, the patient lying on the panel and is not allowed to push.

4. People are not allowed to stand on the bed and jumping. When the backboard is raised, people sitting on the backboard and standing on the bed panel,bed is not allowed to push.

5. It is strictly forbidden to push or pull the gas spring.

6. It is not allowed to push it horizontally to avoid damaging of side rail.

7. Do not drive on uneven roads, and do not park on sloped roads.

8. When using the controller, the buttons on the control panel can only be pressed one by one to complete the action.

It is not allowed to press more than two buttons at the same time to operate the multifunctional electric medical bed, so as to avoid malfunctions and endanger the safety of patients.

9.. It is strictly forbidden to sit on either end of the bed.

 10. When the multifunctional electric medical bed needs to be moved, the side rails should be lifted to prevent the patient from falling and being injured during the movement.

When the electric bed is moving, two people must operate it at the same time to avoid losing control of the direction,to prevent causing damage to the structural parts and endangering the health of the patients.